Home > ACURA > ACURA INTEGRA > Alternator for 1994-1995 Acura Integra 1.8L (Denso Ref# 101211-5410, -5430) - 13529

Alternator for 1994-1995 Acura Integra 1.8L (Denso Ref# 101211-5410, -5430)  - 13529

1994-95 Integra Alternator

Item #:13529
Your Price:$119.00
Quantity:

Product Description

Description

Direct Fit Aftermarket Replacement Alternator, 90 Amp, 12 Volt, CCW, 4-Groove Pulley, Denso Type . 100% performance tested from component through final assembly to ensure dependable service and reliable performance. 1 Year warranty

Application

1994-1995 Acura Integra 1.8L

Cross Reference

Replaces
Acura 31100-P72-003, 31100-P72-003RM, 31100-P75-003, 31100-P75-003RM, CJS42, CJS44, CJS46, Denso 101211-5410, 101211-5430, 9761211-541, 9761211-543, Honda 31100-P75-0030 Other: 13529, 400-52334, AND0106, 186-0702, AL1268X, 210-0211, 13529, 13530, 290-485, 14276, 90-29-5230






Alternator Rebuild Kit for 1994-1995 Acura Integra 1.8L (Denso Ref# 101211-5410, -5430)  Regulator, Brushes, Bearings -13529RK
Alternator Bearing for Denso Alternator (10-2021-4)   15mm ID x 35mm OD x 13mm W - 53514
17mm ID x 52mm OD x 16mm WIDE  ALTERNATOR BEARING FOR NIPPONDENSO ALTERNATORS -55222
Brushes for Nippondenso Denso IR/IF Alternators 021620-2720  27370-42010 - 74909203
Alternator Brushes Nippondenso (2 Pack)  4.8-5mm Tall x 7mm Wide x 15/14mm Long x 48mm Long Lead - 7390901
Alternator Connector, Qty 4,  Rectifier to S.R.E. Cover on Denso  - 99901012
Dust Shield Denso Alternators for SRE Bearing (14.8mmID x 15.6mmOD With 21.7mm Flange)  - 92909043
Alternator Brush Holder Seal / Gasket, 1.9mm Thick QTY 2- 91904708
Grommet x4 Stator Lead on Denso Alternators (Ref# 021605-1970) - 91904711
Flanged Nut M5 x 0.8  (	5CNCKZ, NK2300-5) PKG of 10  - 95001451
Nut, Hex, M14-1.5, 6.9mm Thick (pkg of 4) - 95001505
Nut 10mm X 5mm X M6-1.0 with Including Attached Floating Washer  QTY 5 - 9590001
ALTERNATOR LEAD REPAIR HARNESS FOR HONDA ACURA PLUG CODE 294 - 9801294
HD Alternator Rectifier for Denso Units on Acura, Honda, Lexus, Toyota - 77904014
Bearing Retainer (021411-0570) - 8590900
Dust Shield Denso Alternators for SRE Bearing (14.8mmID x 15.6mmOD With 21.7mm Flange)  - 92909043
Alternator Rotor Slip Ring for Denso Alternators - 7190904a
Bearing Retainer Screw / Bolt  M4.5 x 0.75 x 18mm L, Phillips hex washer head, 7mm drive - 96909012
Alternator Rectifier Brush Holder Screw 5 Piece M4 x 0.7 x 5.7mm L for Denso 949006-5460, 949007-3370, 949007-3930, 949007-6280 - 96909016
Alternator Starter Hardware Bolt M4 x 0.7 x 25mm L -96909063
Screw / Bolt, M5-0.8,  9mm Long, Hex Washer Head, QTY  - 96909065,
Stator for 70-90 Amp 12 Volt  Denso Alternator -  72908502
Alternator Housing Assembly Stud (4 Pack) for Denso Internal Fan Alternator - 96909009

update 09/09/18




Please Post Your Comments or Questions

comments powered by Disqus